Coemar ReLite LED Kit DIM Daylight

Contact us for pricing
Categories: 
More from
SKU: 
DESCRIPTION
TECHNICAL INFORMATION
DESCRIPTION

If you want to switch your TV studio or theatre from halogen to LED, the ReLite Series is the perfect solution for you.
Easy retrofittingexcellent white light qualityhuge power savings with almost no heat generated and long life LED lamps are just some of the advantages offered by our ReLite Series.

The new ReLite Led Kit is the retrofit solution to every old halogen fixture, since the LED socket is adaptable to every projector. This retrofit LED lamp shows an improved light output compared to the standard ReLite versions thanks to the external box: this technology enables to keep all the electronics of the product outside the fixture, thus avoiding the overheating of the projector.

With the ReLite Led Kit DIM version, the light source will be controllable via traditional TRIAC/IGBT dimmers (through a potentiometer on board) and by DMX with full digital settings. This retrofit solution has been designed for all installations where traditional dimmers are still in use.

Tungsten and Daylight versions available (CRI 90 or Studio version with CRI > 95).

  • Dimming controlled via standard external power dimming unit or with potentiometer knob
  • USITT DMX512A
  • DMX channels: 5 / 1
  • Setting, addressing, testing and measurements via LEDs display
  • RDM (Remote Device Management)
  • Fixed white CCT: 5.600 K
  • Linear dimming from 1% to 100% from traditional TRIAC or IGBT dimmers (through a potentiometer on board) or by DMX
  • 2 dimming curves selectable, simulating halogen or discharge lamp based fixtures
  • Flicker-free operation with LED frequency controlled via DMX or display from 640 to 1.500 Hz (different curves selectable)
  • IP rating: 20
  • Thermal protection
  • CE approved
  • Instantly upgrade an existing Arri, ADB or De Sisti (and more)
  • Power supply: 90-230 V, auto-sensing, 50/60 Hz
  • In PowerCon connector
  • Power consumption: depending on the LED module and the size/model of the fixture
  • DMX data in/out: 5 pin locking XLR
  • Length: 190 mm (7.5 in)
  • Width: 170 mm (6.7 in)
  • Height: 85 mm (3.3 in)
  • Weight: 3 Kg (6.61 lbs )

 

Daylight COB LED (CRI 90 – CRI > 95). Average LED lifetime: a minimum of 80% of the initial luminous flux will be maintained after approx. 50.000 hours of usage (50.000 LM80).

TECHNICAL INFORMATION

Additional information

ATENDI AB

NÄCKROSGATAN 4
233 63 BARA
SVERIGE

INFO@ATENDI.SE

+46703690059

linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram