Dedolight PB70 1.2HMI Parallel Beam System

196,249 kr

Excluding VAT (Moms)
leasing
5711kr/mån
Info Läs mer om leasing.
Wasa Kredit AB
Leasing Betala från 4 498 kronor i månaden
Totalbelopp 196 249 kr
Uppläggningsavgift 550 kr
Avtalstid Månadsavgift Restvärde
24 mån 8 145 kr 19 625 kr
36 mån 5 711 kr 19 625 kr
48 mån 4 498 kr 19 625 kr
Samtliga belopp är exkl. moms
Leasing via Wasa Kredit
– den smarta finansieringslösningen
Wasa Kredit äger varorna under leasingperioden, ert företag har nyttjanderätt. Månadsavgiften är avdragsgill. I slutet av avtalstiden köper du loss varorna för restvärdet. Leasing erbjuds för köp från 2 400 till 2 000 000 kronor.
Så här gör du:
Varukorg Lägg varorna i varukorgen och gå till kassan.
Avtalstid Välj mellan avtalstiderna 24, 36 eller 48 månader.
Kort Avtalsprocessen är automatiserad och kreditkontroll görs direkt i kassan.
Mobil Slutför beställningen med signering av BankID av bolagets firmatecknare.
Avtal När avtalet godkänts kan varorna levereras.
Categories: 
More from
SKU: SETDPB70
DESCRIPTION
TECHNICAL INFORMATION
DESCRIPTION

THE PB70 IS A SPECIAL, PROFESSIONAL LIGHTING FIXTURE, PROVIDING A POWERFUL PARALLEL BEAM
The PB70 is the largest and most powerful of the parallel beam lights, mainly directed at the use in Lightstream Drama applications. Beam projectors have been known in our industry, but this one is different, as much as it offers a very defined beam, and at the same time a homogenous light distribution all across the beam.

The beam has an exit diameter of 70cm, 27.5 inches. This parallel beam light fixture can be used for the appearance of a natural light source, being far away by virtue of its character, and its over-ruling of the square law. For this reason, this light fixture has already been chosen for some major film projects to simulate sunlight because of its natural and unique character.

When operating this light fixture with reflectors, there is a choice of the largest reflector that we currently provide, using a 100 x 100 cm reflector surface (usually the # 1 type) to redirect the light in an opportune direction, without much change to the beam diameter and the beam character, and without causing much noticeable stray light. Especially, when such a large reflector, redirecting the entirety of the beam, is used, the result is a virtual light source at considerable distance. Thus, talent/actors are able to move in the reflected light, without diminishing light intensity when changing position.

This lighting instrument can therefore be used with a large reflector to redirect the light beam in its entirety, or can be used with a multitude of smaller reflectors, to direct parts of the beam in different angles and directions.

Often, a multitude of reflectors is used for secondary and third reflectors, to change the direction of the light, to change the character of the reflected light, and thus, lighting entire scenes from a single light source. The side effect of such lighting practice is to eliminate a lot of lighting paraphernalia from the set without cluttering the set with many fixtures, lighting stands, flags and other instruments.

Sometimes the entire diameter of the parallel beam gets redirected by a large reflector (1×1 meter), no. 1 type.

Other times, several smaller reflectors share the beam to redirect the light simultaneously to several directions and further reflectors.

The deeper you insert the reflector into the beam, the more light becomes active. Thus, you choose a level of intensity without changing color or character. (You could call this: opto-mechanical dimming)

The Lightstream beam light and reflector systems’ great achievement consists in the fact that we achieve all this without altering the color quality or character of the initial light.

The PB70 light is powered by the dedolight DEB1200D flicker-free ballast, which also allows dimming of the light source up to 40% and operates quietly and can be controlled by DMX signals.

The PB70 is rainproof and therefore suitable for lighting setups in exterior and continuous use, even under adverse conditions.

The beam can further be cleaned from remaining parasitic light by adding a honeycomb, which reduces the light output only minimally.

A filter holder can be added for total or partial filtering with gel filters.

A transport case is available (Code: DCHD70, Euro 930) to receive the light head, as well as the ballast or necessary cabling, and three sets of reflectors, as well as a choice of mounting/grip equipment.

 

DPB70:
Overall outer dimensions: 92.2 x 100.67 x 62.11 cm
Weight: 49.8 kg (109.8 lb)
Light source: special design, 1200W metal halide lamp with G22 socket
specially adapted for function within the DPB70 light fixture
Power consumption: 1200 W

DEB1200D:
Dimensions: 32.8 x 23.0 x 22.5 cm
Weight: 11.4 kg
Output Power: 1200 W
Input Voltage: 90-264 V AC
Indicators: 3 Status LEDs (Ready, Lamp, Heat)
Dimming Range: 100-60%
DMX Control: DMX control and auto start mode can be chosen
The frequency to operate the lamp is switchable from normal flicker-free function to
1000Hz for high-speed recordings

TECHNICAL INFORMATION

Additional information

ATENDI AB

OLOF WIKS VÄG 9C
444 65 JÖRLANDA
SVERIGE

INFO@ATENDI.SE

linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram